How to Print 2x2x6 strips on FotoFliqs

Configuring the App for Strip Printing

Does your printer support cutting the paper into strips? Or do you have perforated media? You can configure the app to print your template doubled, so that it can be cut into two.

1. Choose a 2×6 template in the app.
2. Turn on the print option in the Template Editor.

Not sure where to find this? Watch this video:

Configure Your Printer

If you haven’t set up your printer to print strips yet, you need to do that now.

If you have an AirCast Pro II, watch this video:

If you have a DNP WCM Plus, watch this video:

Changing WCM Settings

For WCM Version 1

If you have the original DNP WCM unit, follow these steps:

1. Connect your iPad or computer to the WCM’s network (e.g., DNPWirelessConnect).
2. Open a web browser and navigate to http://192.168.4.1.
3. Locate your printer in the table, select it, and click Edit.
4. Set the “Option” to “Print Size” and select the desired cut option. Save your changes.

For WCM Version 2

Enabling All Print Sizes

1. Connect your iPad or computer to the WCM’s network (e.g., DNPWCM-xxx).
2. Open a web browser and navigate to http://192.168.4.1.
3. Select your printer and click Printer Settings.
4. Check all the boxes in the Print Sizes section and save your changes.

Selecting Paper Size in Booth.Events App

1. Ensure your iPad is still connected to the WCM network.
2. If a printer is already connected, remove it.
3. Add the printer again, and select the desired paper size directly from the app.