Author: Red Melitante
How to Set Up Your Printio Module to Work with Your iPad
Watch the Video Tutorial What’s Included in the Printio Module Kit What You’ll Need Step-by-Step Setup Guide Step 1: Connect the LAN Cable Step 2: Set Up the USB Hub Step 3: Power the Printio Module Step 4: Connect the Printer Configuring Your iPad Testing the Connection Printing Photos Troubleshooting If you experience issues:
How to Fix common issues on Printio
Step-by-Step Instructions Step 1: Confirm “Ethernet” appears on the iPad If missing: Unplug the USB cable from the head unit and plug it back in firmly. Recheck on the iPad. Step 2: If Ethernet shows but printer or printio.local won’t load Your IP looks fine, but you can’t see the printer or open http://printio.local. Unplug USB-C power, wait 15–20 seconds, then plug […]
Switch Helio Sport/E1000 Faceplate to Landscape Mode
Module Connection Guide Step-by-Step Instructions Notes:
Ring Roamer Setup Guide
Install your iPad into your Sapphire Ring Roamer Step-by-Step Instructions Step 1: Clean the iPad Screen Step 5: Reattach the back cover Step 2: Orient the iPad correctly Step 6: Calibrate the touchscreen (if necessary) Step 3: Install the iPad Step 7: Test the touchscreen Step 4: Prepare the back cover How to Assemble Ring […]
How to install iPad into E1000
How to Insert Your iPad into the E1000 Photo Booth Step-by-Step Instructions Step 1: Loosen the Center Screw Step 8: Align the iPad Step 2: Remove the Back Plate Step 9: Reattach the Bracket Step 3: Loosen the Wing Nuts Step 10: Secure the Wing Nuts Step 4: Remove the Bracket Step 11: Close the […]
How to Assemble Ring Roamer/E1000 Stand
To setup your stand please download the manual here: Troubleshooting If you encounter any issues or need further assistance, please contact our support team at help@ataphotobooths.com.
How to switch from Button Control to Bluetooth Control
Module Connection Guide Step-by-Step Instructions Step 1: Identify Your Components Step 2: Understand the Default Configuration Step 3: Switch to WP-Controlled Module Step 4: Verify Software Connection Once connected, your module is ready for software-based control. If you encounter any issues, feel free to contact our support team.
How to connect LED lights on fotofliqs with multiple booths around
How it works – turn off the new setting, “Automatically connect to supported devices”. It is on by default.– hit “reset to defaults” if this app has already connected to anything in the past– now once devices are in range, you can hit the Connect button in the new “Discovered Devices” section
How to connect and change the Ringlight Color on Your Booth Via Bluetooth
How to connect and change the Ring light Color on Your Booth Via Bluetooth Step-by-Step Instructions Step 1: Download the LED Hue App Step 4: Photo Booth Software Compatibility Step 2: Set Up Bluetooth Step 5: Customize or Use Presets Step 3: Configure the Settings Once configured, your LED lights are ready to use. Customize […]